欢迎光临格烁照明官方网站!
十年品牌 值得信赖!
全国咨询电话:15322427999
当前位置:首页 > LED专利标准/检测认证

PowerInt TOP265EG 30W待机电源参考设计

文章出处:8gled.com作者:格烁光电发表时间:2018-07-24
大连代孕-产前频道wvbP【30+专家助阵】PowerInt 公司的TOPSwitch-JX系列(TOP264-271)集成了725V功率MOSFET,高压开关电流源,多模式PWM控制,热关断电路,故障保护和其它控制电路, 265 VAC电压下无负载的功耗低于100mW.本文介绍了TOPSwitch-JX系列(TOP264-271)主要特性, 方框图, 通用输入高效19V 65W反激电源电路图和采用TOP265EG的12V 30W高效待机电源设计案例的电路图和所用材料清单.

TOPSwitch-JX TOP264-271 cost effectivELy incorporates a 725 V power MOSFET, high voltage switched current source, multi-mode PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.

TOPSwitch-JX 系列主要特性:

EcoSmart? - Energy Efficient

? Energy efficient over entire load range

? No-load consumption below 100 mW at 265 VAC

? Up to 750 mW standby output power for 1 W input at 230 VAC

High Design Flexibility for Low System Cost

? Multi-mode PWM control maximizes efficiency at all loads

? 132 kHz operation reduces transformer and power supply size

? 66 kHz option for highest efficiency requirements

? Accurate programmable current limit

? Optimized line feed-forward for line ripple rejection

? Frequency jittering reduces EMI filter cost

? Fully integrated soft-start for minimum startup stress

? 725 V rated MOSFET

? Simplifies meeting design derating requirements

Extensive Protection Features

? Auto-restart limits power delivery to <3% during overload faults

? Output short-circuit protection (SCP)

? Output over-current protection (OCP)

? Output overload protection (OPP)

? Output overvoltage protection (OVP)

? User programmable for hysteretic/latching shutdown

? Simple fast AC reset

? Primary or secondary sensed

? Line undervoltage (UV) detection prevents turn-off glitches

? Line overvoltage (OV) shutdown extends line surge withstand

? Accurate thermal shutdown with large hysteresis (OTP)

? Heat transfer to both PCB and heat sink

? Optional external heat sink provides thermal impedance equivalent to a TO-220

? eSIP?-7C package:

? Vertical orientation for minimum PCB footprint

? Simple heat sink mounting using clip provides thermal impedance equivalent to a TO-220

? Extended creepage to DRAIN pin

? Heat sink is connected to SOURCE for low EMI


图1.TOPSwitch-JX系列功能方框图(E 和V 封装).

图2.TOPSwitch-JX系列通用输入高效19V 65W反激电源电路图

采用TOPSwitch-JX系列TOP265EG的12V 30W高苏州代孕-【献给母亲的爱alqQ】分娩频道效待机电源设计案例

12V 30W设计案例主要特性:
?
Highly energy efficient
?
Full load efficiency >90%
?
Efficiency >87% above 10% load
?
Average efficiency >90% (25%, 50%, 75%, 100% load points)
?
No-load input power <100 mW
?
Simplifies meeting ENERGY STAR 2.0, 80 Plus and EuP requirements
?
725 V MOSFET rating allowed high turns ratio (VOR) and use of 60 V Schottky output diode
?
Low cost, low component count and small PCB footprint solution
?
Performance met without synchronous output rectification
?
132 kHz operation optimized core size and efficiency performance
?
Low-profile eSIP package

Integrated Protection and Reliability Features
?
Line under-voltage lock out (UVLO)
?
Primary sensed latching output overvoltage shutdown (OVP) with fast AC reset
?
Auto recovery output over current (OCP)
?
Meets limited power source (LPS) <100 VA requirement with a single point of failure
?
Accurate thermal shutdown with large hysteresis


图3.设计案例PCB外形图(2.97 x 2.14 吋).

设计电源指标:


图4. 12V 30W设计案例电路图

设计案例材料清单:


图5. 12V 30W设计案例变压器电框图

详情请见:
http://www.powerint.com/sites/default/files/product-docs/topjx_family_datasheet.pdf

http://www.powerint.com/sites/default/files/PDFFiles/der246.pdf

大连代孕-产前频道wvbP【30+专家助阵】 PowerInt TOP265EG 30W待机电源参考设计原创编辑请注明出来http://www.huatejx.com

排行榜

最新资讯文章